The hAP ac lite also known as RB952Ui-5ac2nD-TC is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license. New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.
Mikrotik Wireless Dual-Chain 2.4GHz Micro Access Point
The mAP (micro Access Point) also known as RBmAP2nD is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources – USB, Passive PoE and power jack. It also works as a PoE injector – the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
Technical Description
Architecture   MIPSBE
CPUÂ Â Â QCA9531
CPU core count   1
CPU nominal frequency   650 MHz
Dimensions   68x68x19mm
License level   4
Operating System   RouterOS
Size of RAMÂ Â Â 64 MB
Storage size   16 MB
Storage type   FLASH
Tested ambient temperature   -20°C to 70°C
MicroUSB input Voltage   5-5 V
PoE in   802.3af/at
PoE in input Voltage   12-57 V
PoE out   Passive PoE
PoE-out ports   Ether2
Number of DC inputs   3 (PoE-IN, DC jack, MicroUSB)
DC jack input Voltage   8-57 V
Max out per port output (input <30 V)Â Â Â 0.5 A
Max total out (A)Â Â Â 0.5 A
Max power consumption   5 W
Wireless 2.4 GHz Max data rate   300 Mbit/s
Wireless 2.4 GHz number of chains   2
Wireless 2.4 GHz standards   802.11b/g/n
Antenna gain dBi for 2.4 GHz   1.2
Wireless 2.4 GHz chip model   QCA9531
Wireless 2.4 GHz generation   Wi-Fi 4
10/100 Ethernet ports    2
Number of USB ports   1
USB Power Reset   Yes
USB slot type   microUSB type AB
Max USB current (A)Â Â Â 1
PCB temperature monitor   Yes
Voltage Monitor   Yes
RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful (up to 1W!) dual chain 2.4Ghz 802.11bgn wireless, RJ45 serial port, microUSB port and RouterOS L5 license. RB2011UiAS-2HnD-IN comes with desktop enclosure, two indoor antennas for wireless, power supply and touchscreen LCD panel.
This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. hAP provides PoE output function for port #5 – it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP ports. Any MikroTik device with active cooling that has SFP ports can now be used without installing any optical fiber, just plug the S RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware. S RJ10 module is supported also on devices with passive cooling, but may require an extra cooling. New revision of S RJ10 comes with several improvements: – Jumbo frames up to 10218 Bytes are now supported; – Link speed reporting is fixed – actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly; – DDM monitoring (Supply Voltage, Module temperature) is now supported.
S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S , by popular demand is now also available for purchase separately
The BaseBox2 also known as RB912UAG-2HPnD-OUT is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
Product Description Designed for performance and clarity by a microphone company. Decades of expertise developing studio-recording microphones is baked right…
MXL AC-360-Z V2 360° Audio Pickup Microphone For Zoom Rooms Only – Black
Designed for performance and clarity by a microphone company. Decades of expertise developing studio-recording microphones is baked right into the MXL ac-360-z V2. Twelve internal condenser microphone capsules, divided into four quadrants, ensure 360 degrees of perfect speech intelligibility within a 25-ft radius, without Reliance on any additional equipment. Built for reliability and enhanced durability Solid, all-metal construction and a reinforced frame give the ac-360-z V2 extra durability for shared office environments. The included locking DC power supply ensures that the ac-360-z V2 won’t get accidentally unplugged during important meetings. Co-designed with zoom to offer the ultimate zoom room mic. When used with zoom, each Quadrant is individually processed and optimized for zoom room acoustics and configurations. Multiple ac-360-z V2’s can be daisy-chained together using included USB-C cables for the large Zoom room installations. Flexible installation options, right out of the box The ac-360-z V2’s rubber feet are removable so that the unit can be mounted directly on conference room tables using the included assortment of USB cables, universal power supply, and mounting pads to enable virtually any installation, anywhere.
